Winsoft ComPort For Android FT31xD 1.3 Full Source
The architecture consists of a USB connection component that operates as the interface to the com port with the PC. It is the component responsible for communicating with the data logger using the USB bus. In this way, it converts between the data logger and your PC data bus, which is a typical serial bus. This architecture is fully event-driven. It means that the client layer should be notified in the event of any event. This architecture is the only one capable of handling all types of data logger transfers. The monitoring component is the component responsible for sending commands to the data logger and reading responses from the data logger.
The event-driven architecture provides the highest possible performance and allows all the tools to run in the background. Advanced class object structure. Advanced but easy to use design interface. Optimized event-driven architecture. Supports all important transfer protocols. Components to build advanced comport servers. Easy to use with any type of serial hardware. Handles COM ports > 9 and also virtual COM ports (mapped on USB RS485 devices for example). TVaTerminal component, providing a codeless terminal for asynchronous communications. TVaTerminal supports an extendable emulation interface. TTY emulation component and simple ANSI color sequence handling emulation component. TVaDisplay component to visualize modem status. TVaTerminal component, providing a codeless terminal for asynchronous communications. informations
once the host computer and data logger are established, they can talk to any device that supports the windows usb protocol. the winusbprotocol..vcl component by winsoft spol. s r.o. shareware new 22 feb 2020.a whole suite of com port components for delphi and c++builder. delphi and c++ builder bluetooth library for android. bricksoft skype vcl component v.1. delphi and c++ builder library for communicating with hid usb devices. d8a7b2ff72
you can use the package manager to add components to a project by adding a reference to the component and then using the project > properties dialog to set the path and the name of the component. in the solution explorer, right-click on the project, select add new item, and then select com, and select com component. double-click the component to create a new instance of the component. on the component palette, right-click on the component and select "edit component source". you can then modify the component source to create new units and classes.. to avoid this limitation try libraries that use android usb api: active directory recyclebin
the pakbus address you specified in the setup of the software must match the pakbus address of the data logger. all data loggers with pakbus operating systems have a default pakbus address of 1. if you previously connected successfully with the data logger using the same computer, the setting is likely correct. if you are unsure of the pakbus address of the data logger, you can use the device configuration utility to check the pakbus address of the data logger when it connects.