Failed To Setup Driver 536870325
Option 2 (Easy)**: Update drivers manually - You can download the latest touchpad driver from one of the many third-party websites. If you already have a working touchpad driver and you just want to update it, a quick driver update is very simple. You only need to download and install the new driver using the interface provided by the driver install manager.**
Uninstalling the driver that failed is usually not the best solution as this will likely return the original driver when the original driver is no longer available to be installed. This may also result in the device not being available at all. If the touchpad is a very important device for your PC, you may want to try another fix first.
Events.log ,Info PnPIBS: Installing driver C:_SMSTaskSequencedrivers.inf... , Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows Setup could not install one or more boot-critical drivers. To install Windows, make sure that the drivers are valid, and restart the installation.], Info [SETUP.EXE] Called script [X:windowsSetupScriptsErrorHandler.cmd] to handle fatal error, Info [0x070042] DIAG CallBack_DiagnosticDataSend: Called with notification for Error published by ErrorHandler, Info [0x0601d7] IBS InstallWindows:Error Type = 3210240
SMSSetupTransfer.log ,Error PnPIBS: The driver path / is invalid. The package could not be installed. , Error [X:PnP_Comms_Driver_Uninstall_Action] PnPBIs returned with a non-zero response code , Error [X:PnP_Comms_Driver_Uninstall_Action] PnPBIs returned with a non-zero response code, Error [X:PnP_Comms_Driver_Uninstall_Action] PnPBIs returned with a non-zero response code d8a7b2ff72
a8:it may be the wrong baud rate setting for the virtual com port or the driver is not correctly installed. if the correct baud rate (115200bps) does not solve the problem, it is recommended to remove the driver and re-install it once again. to uninstall the virtual com driver, execute the uninstaller (ftdiunin.exe) which is included in the folder of v-com driver.
a8: when you restart the computer, windows will perform a device scan. during the scan, you can see if the driver is correctly installed or not. if the device was not scanned, please see the following tutorial to learn how to manually scan the device by using the device manager: device manager
if you cannot resolve the problem by using the steps mentioned above, then we suggest that you uninstall the driver and re-install it. to uninstall the driver, you can execute the uninstaller (ftdiunin.exe) which is included in the folder of v-com driver.
after downloading your driver update, you will need to install it. driver updates come in a variety of file formats with different file extensions. for example, you may have downloaded an exe, inf, zip, or sys file. each file type has a slighty different installation procedure to follow. visit our driver support page to watch helpful step-by-step videos on how to install drivers based on their file extension.
when you start to provision a target computer, you might see a message that says could not access the remote machine computername over the network. this message can be displayed for several reasons. verify that your host and target computers are both joined to the same domain or the same workgroup. for more information, see provision a computer for driver deployment and testing (wdk 8.1). verify that you entered the correct name for the target computer. verify that you have enabled network discovery and file and print sharing on the target computer.